Simulation of low frequency system on cst microwave studio

Simulation of low frequency system on cst microwave studio serial#

PS: the first S11 pic corresponds to the 12.2 ohms load and the second to the 50 ohms load and there are pics of the mlines too. Because i wanted to test the S11 behavior when the line is terminated in a. The S11 parameter at the second simulation appears to have smallest S11 than the first simulation at many frequencies with a much bigger drop although the line is supposed to be mismatched because of the difference of port-load impedance. Hello everyone, recently i simulated a microstrip line in CST Microwave Studio with width 1.53564 mm and the characteristic impedance value of this line with a substrate with epsr3 at 30 GHz is 12.2 ohms as it can be seen in the correspoding picture attached. As for the source, i placed edge discrete port at both simulations with reference impedance 12.2 ohms. CST Studio Suite includes FEM solvers dedicated to static and low frequency applications such as electromechanical devices, transformers or sensors.

Simulation of low frequency system on cst microwave studio serial#

Because i wanted to test the S11 behavior when the line is terminated in a load with the same impedance and when it's not, first i placed a load wich i selected a lumped element(first i picked the two necessary edge centers) RLC serial with R=12.2 ohms(C=0 & L=0) and later on, i placed the same load but with R=50 ohms and ran the simulation for both loads. CST MICROWAVE STUDIO CST MWS: edge tools for speed and accuracy leading up to the three-dimensional simulation of high-frequency devices.-CST EM STUDIO CST EMS: simple tools for design and analysis of static and low-frequency devices such as motors, sensors, transformers and -CST PARTICLE STUDIO CST PS: to simulate the motion of charged particles, all based or otherwise. Hello everyone, recently i simulated a microstrip line in CST Microwave Studio with width 1.53564 and the characteristic impedance value of this line with a substrate with epsr=3 at 30 is 12.2 ohms as it can be seen in the correspoding picture attached.